ICE-MAKER ONLY
- Produces up to 1590 lbs. of clean crisp flaked ice per day.
- 2-year Factory Warranty on entire machine.
- 5-year Factory Warranty on compressor and air cooled condenser.
- The Flaker series internal auger design produces the highest quality ice with fewer repairs and less down-time.
- The auger design has achieved good efficiency results with low kilowatt consumptionfor the ice production.
- Attractive corrosion resistant stainless steel finish.
- Hoshizaki Modular Flakers feature the CleanCycle 12 design, which keeps the evaporator barrel clean by performing a 15-minute flush every 12 hours.
- Removable/cleanable air filter removes sediment
- Cleaner ice.
- Longer life and easy maintenance.
- Electrical: AC Supply Voltage 208-230V/60/1 (3 wire with dedicated neutral for 115V), 20amp Max Fuse.
- Plumbing: 1/2" OD copper or equivalent independent potable water supply
3/4" independent drain connection
- Refrigerant: 404a
 |
- The
evaporator has a durable stainless steel freezing cylinder, insulated
within the foamed-in place polyurethane.
- The
stainless steel auger moves ice upward in the cylinder.
- Water
is squeezed from the ice as it passes through the extruding head,
providing hard, dry flakes.
|
*Image is a representation. Actual product may vary based on model, size, and options selected.
| Specifications: |
| Manufacturer: |
Hoshizaki |
| Model: |
F-1500M*H |
| List Price: |
$11,950 |
| Width: |
30" |
| Depth: |
27 1/2" |
| Height: |
34 7/16" |
| Voltage: |
208-230 volts |
| Amperage: |
16.3 amps |
| Wattage: |
3390-3772 watts |
| Weight: |
325 lbs. |
For
detailed information including power and water consumption, actual
production at different ambient temperatures, and installation specs.
please view the product spec. sheet.
Don't
forget that the best way to end up with quality ice is to start with
quality water. Look in our Store for approved water filters for this
machine.
Blog Articles:
It wobbles, no matter what I do.
Ordered this table last week for home use and it arrived promptly via UPS. Setup was a breeze after watching the tutorial video and I discovered a trick to setting up the bottom shelf on your own; with the table upside down, place a box on the underside of the tabletop and then slide the bottom shelf onto the legs so it lies flat against the box. This will level the bottom shelf and hold it in place so you can tighten the fasteners on each leg.
The table itself is moderately sturdy and the 16 gauge steel thick enough to take some abuse. The table is a bit wobbly since there is no back brace and the legs are not welded but this can be remedied by placing the table in a corner. I arranged my table in the middle of my kitchen with the side flush against the wall and the corner resting snugly where my window frame meets it.
Very fast shipment and the table came well packaged, but unfortunately UPS mishandled it a bit so there are minor dents on the sides. However, this does not detract from the rating since it is not Prima's fault. I would suggest, however, that freight shipment be an option for all products if this is possible. I would be willing to pay more if I knew it would protect my investment.
Sturdy, easy to install. 36" length only allows for attachment to one stud. Get yourself (3) 3/16 x 2" toggle bolts. Fast shipping, great price, will shop here again.