The Fetco Extractor Coffee Brewers are without a doubt, the smartest brewers in their class. Never before has there been a coffee brewer that has been more dedicated to the art and science of extracting the perfect cup of coffee, nor has there ever been a coffee brewer so advanced yet so easy to operate.
- Batches per hour (with standard electrical config.) when set up for hot water service: 11 (1 Gallon batches).
- Batches per hour (with standard electrical config.) when set up for cold water service: 4.9 (1 Gallon batches).
- Standard electrical configuration: 1 x 1500 watt heater - 120 volts - 60 hz. - single phase.
- Incorporates an innovative large spray disc, together with Fetco's renowned brew basket.
- All Extractor brewers come equipped with the industry-first Cascading Spray Dome System, to ensure a full and even extraction
- Pulse-Brew brewing system allows you to select a continuous shower or intermittent surges of water for your roasts.
- Pre-Wetting Cycle can be turned on or off to assure thorough extraction of freshly-roasted coffees and maintain correct temperature throughout the entire brew cycle.
- Effortless external calibration and set-up through front panel technology.
- Electronically controlled hot water faucet.
- Adjustable parameters include brew volume and time, bypass percent, pre-wet percent, drip delay, brew temperature, and low temperature/no brew.
- Water Inlet (inch): 3/8 male flare.
- Water Pressure: 20-75 psi.
- Water Flow Rate: 0.25 gpm.
- Dispenser sold separately.
*Image is a representation. Actual product may vary based on model, size, and options selected. Product is shown with dispenser (sold separately).
| Specifications: |
| Manufacturer: |
Fetco |
| Model: |
CBS-2031e |
| List Price: |
$1,846 |
| Width: |
11" |
| Depth: |
18-1/4" |
| Height: |
26" |
| Weight: |
42 lbs. |
It wobbles, no matter what I do.
Ordered this table last week for home use and it arrived promptly via UPS. Setup was a breeze after watching the tutorial video and I discovered a trick to setting up the bottom shelf on your own; with the table upside down, place a box on the underside of the tabletop and then slide the bottom shelf onto the legs so it lies flat against the box. This will level the bottom shelf and hold it in place so you can tighten the fasteners on each leg.
The table itself is moderately sturdy and the 16 gauge steel thick enough to take some abuse. The table is a bit wobbly since there is no back brace and the legs are not welded but this can be remedied by placing the table in a corner. I arranged my table in the middle of my kitchen with the side flush against the wall and the corner resting snugly where my window frame meets it.
Very fast shipment and the table came well packaged, but unfortunately UPS mishandled it a bit so there are minor dents on the sides. However, this does not detract from the rating since it is not Prima's fault. I would suggest, however, that freight shipment be an option for all products if this is possible. I would be willing to pay more if I knew it would protect my investment.
Sturdy, easy to install. 36" length only allows for attachment to one stud. Get yourself (3) 3/16 x 2" toggle bolts. Fast shipping, great price, will shop here again.